/

SANUPS LAN/SNMP Card with Environment Monitoring (New)

Part Number: PRLANIF013B-US

LAN Interface Cards allow UPS units a direct connection to local area networks which enable them to send shutdown commands to 50 target devices, via network cable, even if they are redundantly configured.

Power condition, temperature, and humidity monitoring enhances capability. Status reports enable the administrator to make sound decisions, while e-mail notifications allow them to take quicker action during failure.

Multi OS, Web Telnet, and SSH support allows administrators to shutdown network equipment and storage systems.

LAN Interface Card prioritizes Network Communication and UPS Monitoring

 

  NETWORK COMMUNICATION

Our LAN Card can shut down a variety of network connected computers and servers (up to 50 units) including Windows, Unix, Linux, VMware ESXi, Hyper-V, Storage OS, and firmware devices. Shutdown and restart conditions (e.g., input voltage and frequency) can be preset as desired.

 

REDUNDANT PSU SUPPORT

Network connected LAN Cards work seamlessly with redundant power supply systems. Our LAN Cards can communicate with each other to give preconfigured commands for targeted client shutdown. A preconfigured command is easy as “Minimum number of UPS required” utilizing the SANUPS SOFTWARE.

 

UPS MONITOR

LAN Cards also monitor, record, report, and notify making administration easy and efficient.

  1.  Input/Output power and battery status can be checked in real time.
  2.  View/Record UPS status and event log history (Regular intervals or Power failures).
  3.  Confirm UPS status and change settings remotely using a Web browser* or SSH/Telnet.
  4.  Monitor UPS status with an SNMP manager (RFC1628 standard UPS-MIB and Private MIB).
  5.  Status change notifications via e-mail (e.g., Power failures, battery replacement warnings, fault alarms, and battery test results)
  6.  Obtain UPS status information utilizing e-mail.
  7.  Event log history can be sent to a syslog server.
  8.  UPS test function without system downtime.
  9.  Supports NTP (Network Time Protocol)
  10.  High Security Compliance with SSL/TLS

 

  TEMPERATURE & HUMIDITY

LAN Card with environmental sensors can monitor ambient temperature and humidity. Installation and configuration are as easy as ABC.

  1.  Shut down can be triggered by a pre-configured temperature or humidity level.
  2.  Temperature and humidity statistics (e.g., daily, monthly, and yearly) can be viewed and exported with our user friendly graphical user interface.
  3.  Operating temperature is -25 to 80 Celsius which is also great for the outdoors.

 

Model PRLANIF013B-US
Rated power capacity (apparent/active)
Input
Output
Power Consumption
Battery
Type
Included Battery Packs
Replacement Battery
Typical Recharge time (100%)
Expected Battery Life
Run Time (Load 100%)
External Battery Module
External Battery Module Size (HxWxD)
External Battery Module Weight
External Battery Module Shipping Size (HxWxD)
External Battery Module Shipping Weight
Connection
Acoustic noise
Operating temperature -25 to 60 ℃
Operating humidity 0 to 90%
Operating Elevation 3000 m max.
Unit Size (HxWxD) 33.2x87.6x125.5 mm
Unit Weight 160 g
Unit Shipping Size (HxWxD)
Unit Shipping Weight
Certification
  • Power Consumption

         1.7 W


Supported protocols

-TCP/IP
-UDP -DHCP(DHCPv4 only)
-SNMP(v1, v2c, v3)
-HTTP
-HTTPs
-Telnet
-SSH
-FTP
-FTPs
-SMTP(over SSL/TLS)
-POP3(over SSL/TLS)
-APOP
-NTP


What’s in the box?

  • LAN Interface Card 
  • Manual x1
  • Serial Communication Cable x1
  • UPS Communication Cable x1
  • Cable Tie Mount x1
  • Cable Tie x2

Please download the update tool first. Firmware update must be performed by using the update tool.

To download the newest software & firmware, please submit your email address using the form below.
An automated reply will be sent to you with a download credential (ID & PW).


REMOVE ALL
COMPARE
0