SANUPS D11A

This Model has been

END of LIFE.

D11A switches to an AC input bypass circuit keeping the connected load up and running without fail even if the primary DC input power source fails. A redundant setup will bring unprecedented reliability to mission-critical equipment.

 PARALLEL OPERATION CABINET

Parallel operation cabinets come with 3, 5, or 6 connections. Installing an inverter in a parallel cabinet results in following redundant operation (3 = 2kVA, 5 = 4kVA, and 6 = 5kVA).

Bypass power supply function is available for both parallel and stand-alone inverters. D11A can supply AC power even if the direct current has completely failed.

  EASE OF MAINTENANCE

SANUPS D11A uses a simple plug-in connection. Cable-free installation and maintenance can be performed from the front of the unit actualizing hustle-free ease of use.

  CABINET AS YOU GO

There are 3 types (3kVA, 5kVA, or 6kVA) of cabinets for D11A. Each type allows your capability to expand as your business grows. Also, installing an inverter on a cabinet allows parallel redundant operation to your mission-critical equipment.

SANUPS D11A

D11A Converts 48VDC to pure sine wave 120VAC. Stand Alone, None-Bypass, and Bypass-Cabinets are available.

Stand-Alone
  • 1000VA (1000W)
Stand-Alone w/Bypass
  • 1000VA (1000W)
Parallel Redundant
  • 1000VA(1000W)
  • 2000VA(2000W)
  • 3000VA(3000W)
  • 4000VA(4000W)
  • 5000VA(5000W)
  • 6000VA(6000W)
Parallel w/ Bypass
  • 1000VA(1000W)
  • 2000VA(2000W)
  • 3000VA(3000W)
  • 4000VA(4000W)
  • 5000VA(5000W)
  • 6000VA(6000W)

FEATURES

Wide Input Range

D11A provides value to customers with a very wide input voltage windows, extremely tight output voltage and frequency regulation.

Smooth Air Flow

SANUPS's improved heat prevention design increases its efficiency and saves more electricity than the previous generation.

Coating Protection

SANUPS’s circuit boards are fully coated through soldering to prevent short-circuiting, which is caused by dust and insects. Our dust filters are also available as an option.

Over Current Protection

SANUPS stops excessive currents when overcurrent occurs resulted in no voltage change to the utility power and related equipment around.

Noise Reduction

SANUPS emits the lowest electrical noise possible preventing potential problems to the connected loads. The circuits are designed in the acoustic anechoic chamber.

Short Circuit Protection

SANUPS automatically disconnects the circuit in the event of the overload or short circuit, preventing damage to the network and equipment.

It seems we can’t find what you’re looking for. Perhaps searching can help.

REMOVE ALL
COMPARE
0